Outdoorweb.eu

Top quality Latex Free sealant for tubeless tyres.

1. Used by Nino Schurter, Scott/Sram Team and many other professionals in all cycling sectors.
2. Creates a stable coating inside the tire, sealing instantly.

• Superlight
• Does not damage rims, does not stick to valves
• Easy to clean with water
• Seals holes up to 6 mm
• 6-9 months active
• CO2 friends

Recommended dosage and installation of sealant:
Road tyres: 30-50 ml per tyre
MTB 26" tyres: 60-80 ml per tyre
MTB 27.5" tyres: 80-100 ml per tyre
MTB 29" tyres: 100-120 ml per tyre
MTB DH tyres: 100-140 ml per tyre

Tire valve filling:

- Unscrew the valve and use the applicator to force the desired amount into the tire. Screw in the valve and tighten.

Fill the jacket from the side:

- Place the casing on the rim from one side only. Hang the wheel so that it is vertical. The valve must be at the bottom.
- Pour the appropriate amount of sealant into the casing. The bottle must still be face up when applied.
- Fit the casing from the other side. Start at the top and work towards the valve. Fit the last part of the tire at the valve by turning the wheel with the valve facing up.

Inflate the MTB tire to the required pressure. For road tyres, use the pressure in accordance with the rim and tyre manufacturer's recommendations. Do not exceed the recommended pressure. If the recommended pressures differ, do not exceed the lower of the recommended pressures.
Rotate the wheel so that the sealant reaches all areas inside the tire.

Make a test run. The casing will hold the pressure if the installation procedure is done correctly.

Warning: store out of reach of children. Rinse mouth with water if swallowed, rinse with water if contact with eyes. In either case, contact your physician.