FENIX ARE-C1+ (Li-ion, NiMH) - dual channel charger

The versatile Fenix ARE-C1+ dual-channel charger is designed for both 3.7V/3.6V Li-Ion and NiMH/NiCd batteries. Each charging slot is monitored independently so that batteries of different sizes, capacities and even different chemistries can be charged simultaneously (both Li-Ion and NiMH/NiCd can be charged at the same time). The charger automatically detects the inserted battery type and selects the optimal charging algorithm.

The charger can charge Li-ion batteries of the following types: 26650, 22650, 25500, 18650, 17670, 18700, 14650, 18500, 18490, 18350, 17500, 14500, 16340, RCR123 and NiMH batteries of sizes AAA, AA, C.

• Two independently monitored charging channels
• Charging current of 1000 mA when charging one or two batteries
• Short circuit and reverse battery insertion protection
• Batteries/li>
• LCD display shows charging progress, charging time, charging current and voltage
• Supported charger supply voltage 100 - 240 VAC, 12 - 24 VDC

Weight: 178 grams (charger without cable)
Dimensions: 145 x 75 x 38.5 mm

Using the Fenix ARE-C1+ Charger
Plug the charger into a wall outlet. The display will light up. When the batteries are inserted, the display will show the battery type and charging status. The button next to each charging channel is used to switch the displayed information in the following order: voltage - charging current - charging time. By holding the button for a long time, the display can be switched off and then switched back on again and the current battery voltage will be displayed again.

Caution
Do not charge Li-ion cells that have undergone an over-discharge condition (below 2V). Do not insert batteries into the charger in reverse (reverse polarity). Never plug the charger into a power outlet and a 12V plug at the same time. When using the charger, observe safety guidelines. We recommend using good quality protected Li-ion batteries. It is not intended for charging LiFePO4 batteries.