Outdoorweb.eu

Top quality Latex Free sealant specifically for tubeless handmade tyres. Can also be used for vulcanized. Does not damage rims, does not stick to valves. Easy to clean with water.

Take a test drive. With proper mounting procedure, the tire holds pressure.

Warning: store out of reach of children. Rinse mouth with water if swallowed, rinse with water if contact with eyes. In either case, contact your physician.

• Enriched with Micro Fiber particles, it seals holes up to 6 mm.
• Designed for road tyres and CX/Gravel up to 7.5 Bar.
• 6-9 months active
• CO2 friends
• Forms a stable coating inside the tire, sealing instantly

Recommended sealant dosage and installation:

Road tyres: 30-50 ml per tyre.
Gravel/CX tyres: 60-80 ml per tyre.

Fill the tire with the valve:
Unscrew the valve and press the desired amount into the tire with the applicator. Screw the valve in and tighten.

Filling the tyre from the side:
Fit the tyre to the rim from one side only. Hang the wheel so that it is vertical. The valve must be at the bottom.
Pour the appropriate amount of sealant into the rim. The bottle must still be face up when applied.
Fit the casing from the other side. Start at the top and work towards the valve. Fit the last part of the tire at the valve by turning the wheel with the valve facing up.
Inflate the MTB tire to the required pressure. For road tyres, use the pressure in accordance with the rim and tyre manufacturer's recommendations. Do not exceed the recommended pressure. If the recommended pressures differ, do not exceed the lower of the recommended pressures.
Rotate the wheel so that the sealant reaches all areas inside the tire.