FENIX LD12R - Rechargeable LED flashlight

Brighten your world with the Fenix LD12R pocket flashlight. This flashlight delivers up to 600 lumens of light with a range of up to 186 meters, making it ideal for everyday use, home, cottage, hiking or even work.

Thanks to its innovative design, you can charge the flashlight directly via the USB-C connector, which is perfectly protected against water and dirt. When using an alternate AA battery, the flashlight can still provide up to 150 lumens of light.

The flashlight also features a secondary side light that provides up to 100 lumens of light, perfect for reading or close-up work. And thanks to a sturdy clip with an integrated magnet, you can easily hook the flashlight into a pocket, belt or attach it to an iron surface, allowing you to work hands-free.

With a power-saving mode that provides up to 110 hours of light on a single charge, the Fenix LD12R is a truly versatile flashlight that you should always have on hand. Don't let the darkness stop you. The shopping cart is just a few clicks away - order your Fenix LD12R today!"

Package contents: flashlight, wrist lanyard, ARB-L14-800 Li-ion battery, replacement o-ring and USB rechargeable cable

Warranty: Five years on the flashlight and two years on the battery

1. High lumen output and range:
   The flashlight offers up to 600 lumens of lumen output and a range of 186 meters.
2. Chargeable and waterproof design:
   The flashlight is powered by a rechargeable Li-ion battery and the USB-C connector is perfectly protected against water and dirt.
3. Secondary side light and fixed clip with magnet:
   The flashlight features a secondary side light and fixed clip with integrated magnet, allowing for a variety of use options.
4. Efficient Mode:
   In the 1 lumen power saving mode, it offers up to 110 hours of light on a single charge.

• The powerful Luminus SST-20 LED and the complementary SC1818C LED are used, both with a lifetime of 50,000 hours.
• Four main reflector power modes
• Three side light power modes
• Smooth aluminum reflector for a light cone with a range of up to 186 meters (8616 cd).
• Uses an 800 mAh Li-ion Type 14500 battery to provide power, which is included.
• Regular alkaline or NiMH AA batteries can also be used for operation, but maximum output is limited to 150 lumens with them.
• Protection against accidental insertion of the battery in reverse (reverse polarity).
• Made of T6 type aerospace hardened aluminum.
• Resistant to falls from a minimum height of 1 meter.
• The flashlight has a memory for the last set power mode of the main reflector.
• Bottom surface - Type III hard anodized.
• Breakproof and waterproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Hardened ultra clear glass lens with anti-reflective surface.
• Clamp with integrated magnet - the flashlight can be attached to anything iron..
• Light-gauge threads with increased wear resistance.

Lighting Modes:

Four main reflector power modes: 600 lumens (1.3 hours) -> 150 lumens (3.3 hours) -> 30 lumens (16.3 hours) -> 1 lumen (110 hours).
>Three side light output modes: 100 lumens (4 hours) -> 30 lumens (14.5 hours) -> 5 lumens (53 hours).

Specifications:

Lumen output: 600 lm
Range: 186 m
Max life: 110 hours
Power: 1x AA, 1x 14500
Number of modes: 7
Light color: Daytime White (5500-6500 K)
Waterproof: IP68 (2 m immersion)
Light Source: SC1818C LED, Luminus SST-20
Weight: 74 g
Dimensions: 12.1 x 1.9 x 2.2 cm
Material: T6 aerospace-grade hardened aluminum

Using the Fenix LD12R LED Flashlight
Remove the insulating cap from the battery before first use.
Press the flashlight's end button fully to turn on or off. To switch between the main and side reflectors when the light is on, loosen the head of the flashlight until it turns off (about a quarter turn), then tighten it again. This will switch between the main and side reflectors. You can change the power modes with the flashlight on by pressing the button in the end cap.
The flashlight has memory for the main reflector power modes. If you turn it off with the button and turn it back on in more than 1 second, it will turn on in the last mode you set.
Charging - Loosen the head of the flashlight 3 to 4 turns to expose the charging port and plug the USB-C charging cable into the flashlight's charging port. Tighten the head again when charging is complete. Normal charging time is approximately 2 hours for a fully discharged flashlight. The flashlight cannot be used while charging. During charging, the indicator next to the charging connector glows red, after charging it glows green. If you use a disposable alkaline or NiMH battery, do not attempt to charge it in the flashlight!
Battery charge indication - next to the charging connector there is a battery charge indication LED (it is necessary to unscrew the head of the flashlight by 3-4 turns). After pressing the button, the indication will light up for 3 seconds. If the indicator LED is green the battery is more than 85% charged. Green flashing indicates 50-85% capacity. If the light is red, the battery is 25-50% charged. Red flashing indicates less than 25% battery capacity remaining. This feature is only active when using 14500 Li-ion batteries.
Intelligent Overheat Protection - When using the flashlight on the highest power mode for extended periods of time, a large amount of heat will build up. The flashlight will then automatically reduce power to lower the temperature.
Drained Battery Warning - If the battery voltage drops below the set level, the flashlight will reduce brightness to a lower level until it reaches the lowest mode. After reaching the lowest power level, it will flash three times every 5 minutes to remind you to recharge or replace the battery. This function is only active when using a Li-ion battery type 14500.

Caution
Do not disassemble the sealed part yourself, it will violate the warranty.
Remove the alkaline battery from the flashlight if you will not use it for a long time or if the battery is already discharged. This will prevent the risk of leakage and subsequent damage to the flashlight.
If the protective rubber rings appear damaged after extended use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the flashlight will be properly protected against water.
If the flashlight flickers, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
- The battery is dead - charge it or replace it.
- The contacts inside the flashlight are clogged - clean them with a cotton swab dipped in alcohol.
- The head or back of the flashlight is loose - tighten them.