FENIX HT32R 4000 lm černá Hunting torch

The Fenix HT32R hunting torch combines extreme output with a wide choice of light. The white LED delivers up to 4000 lumens with a beam distance of 740 metres. It also offers green, red and blue light for discreet movement in nature or signalling.

Special TIR optics allow switching between a narrow, wide and combined beam. The torch is designed for professionals, hunters and anyone who demands top performance.

Charging: USB-C under a sliding cover resistant to dust and water, supports 9V/3A fast charging, charging time approx. 1.5 hours

Beam distance: long-range white light 740 m (140,000 cd), combined 620 m, wide 90 m, red 110 m, green 145 m, blue 80 m

In the box: ARB-L21-5500 rechargeable battery, USB-C charging cable, wrist lanyard, belt holster, spare O-ring

1. Three white-light beams
   Luminus and Osram LEDs in special TIR optics offer a combined, long-range and wide beam. The long-range beam reaches up to 740 metres, the combined beam 620 metres and the wide beam 90 metres.
2. Fast control and coloured lighting
   A mechanical rotary switch combined with an electronic switch lets you quickly select mode and colour. Green light reaches 650 lumens, red 400 lumens and blue 200 lumens.

• Up to 4000 lumens
• Beam distance up to 740 metres
• 19 lighting modes
• 21700 battery, 5500 mAh
• Fast charging via USB-C
• IP68 waterproof and dustproof
• Recoil resistant
• Digital output regulation, reverse polarity protection, deep discharge protection
• Automatic gradual output reduction above 60 °C
• Memory – switches on in the last used white-light mode (except Turbo)
• IP68 waterproof and dustproof (2 metres underwater), 1-metre drop resistance

Lighting modes:

Combined beam: 4000 lm (2 h 5 min) -> 1000 lm (3 h 30 min) -> 350 lm (9 h 20 min) -> 30 lm (92 h 30 min)
Long-range beam: 2500 lm (2 h 35 min) -> 1000 lm (3 h 20 min) -> 350 lm (9 h) -> 30 lm (92 h 20 min)
Wide beam: 3200 lm (2 h 10 min) -> 1000 lm (3 h 20 min) -> 500 lm (7 h 25 min) -> 50 lm (63 h 10 min)
Red light: 400 lm (2 h 50 min) -> 15 lm (70 h 35 min) -> flashing 15 lm
Green light: 650 lm (3 h) -> 100 lm (29 h 50 min)
Blue light: 200 lm (2 h 40 min) -> 20 lm (26 h 10 min)

Specifications:

Product type: hunting torch
LEDs: 1x Luminus SFT42R (central long-range reflector), 4x Luminus SST20F (wide reflector), 6x Osram Ostar for coloured light with a lifespan of 50,000 hours
Number of modes: 19
Beam distance: 740 m
Output: 4000 lm
Power: 21700 Li-ion rechargeable battery, 5500 mAh (type ARB-L21-5500), included
Controls: rotary mechanical switch and electronic button
Material: A6061-T6 aerospace-grade hardened aluminium, Type III hard anodised finish
Clip: fixed, with titanium finish
Dimensions: length 16.48 cm, head diameter 6.1 cm, body diameter 2.85 cm
Weight: 259 g (including battery)
Parameter measurement: according to ANSI/NEMA FL 1-2009

Operating the Fenix HT32R hunting torch
From the factory, there may be an insulating cap on the battery inside. Remove it before first use.
On/off: The torch is equipped with a rotary switch with positions for white light (W), lock (lock icon) and coloured light (C). If the torch is locked, turn the switch to (W) or (C) to switch it on in the respective mode. If the torch is off and unlocked (switch in W or C), switch it on by pressing and holding the electronic switch for 0.5 seconds. Switch off by holding the electronic switch again for 0.5 seconds, or by turning the rotary switch to the central lock position.
Switching light types and colours: Use the rotary switch to choose between white and coloured light. In white light mode, hold the electronic switch for 1.2 seconds to cycle between combined beam -> long-range beam -> wide beam. In coloured light mode, hold the electronic switch for 1.2 seconds to cycle between red -> green -> blue light.
Changing output level: With the torch on, switch output levels with short presses of the electronic switch. (In white light it cycles Low -> Medium -> High -> Turbo; for coloured lights it cycles Low -> High, or flashing for red).
Charging: Slide open the cover on the side of the torch and connect the supplied USB-C cable. During charging, the indicator by the port lights red; when fully charged it lights green. Charging time is approximately 1.5 hours with a 27 W USB power source.
Battery status indication: With the torch off, you can briefly press the electronic switch; the indicator lights for 3 seconds and shows the charge status: green indicates 100–85%, flashing green 85–50%, red 50–25% and flashing red a critically low battery (25–1%).
Low-battery warning: If the battery voltage drops below the set level, the torch gradually reduces brightness. After reaching the lowest output, the charge indicator starts flashing red to alert you to recharge or replace the battery.
Intelligent overheat protection: The torch has very high output; if its temperature exceeds 60 °C, output will be automatically and gradually reduced. Once the temperature drops below 60 °C, higher output can be used again.

Warning
Use only high-quality rechargeable 21700 Li-ion batteries with protective electronics.
Insert the battery with the positive terminal towards the head of the torch.
Disassembling the sealed part of the torch head will void the warranty and may cause damage.
If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber wear. Following these rules will keep the torch properly protected against water.
If the torch flashes, does not switch to higher output modes, or does not turn on, it may be due to one of the following reasons:
- The battery is nearly discharged – recharge it or replace it.
- The contacts inside the torch are dirty – clean them with a cotton swab soaked in alcohol.
- The tail of the torch is loose – tighten it.