FENIX GL19R - Weapon charging flashlight

Introducing the Fenix GL19R - the ultimate flashlight for anyone looking for a combination of reliability and high performance. Designed specifically for mounting on short and long guns, this flashlight is an essential tool not only for professional security forces, but also for avid sport shooters and airsoft enthusiasts.

With an incredible 1200 ANSI lumen light output and a range of up to 210 meters, the GL19R ensures that your every target will be perfectly illuminated. Whether you're in the field or on the range, you'll always have a clear view of the situation with this flashlight.

With the built-in Fenix ARB-L18-1100P Li-ion battery and convenient USB-C charging connector, you'll never get lost in the dark. Charging is quick and easy, right in the flashlight, without the need for additional charging devices.

With ambidextrous controls, the GL19R is friendly for both right and left-handed users, and offers variable lighting modes - from full power to 350 lumens power saving mode, as well as strobe flashing for special situations.

Mounting it on the gun is a breeze. Tool-less, quick and easy to attach the flashlight to MIL-STD-1913 and GLOCK standard Picatinny rails, making it an ideal choice for a wide range of firearms, including those used by the National Police.

All technical specifications, from lumen output to waterproofing and range, have been rigorously tested to stringent ANSI/NEMA FL 1-2009 standards so you can be confident that the flashlight will meet your expectations in any situation.

Included in the package: flashlight, Fenix ARB-L18-1100P battery, USB-C charging cable, Picatinny rail mounting plate (the GLOCK plate is already pre-installed on the flashlight from the factory), and instructions.

Warranty: five years on the flashlight. Two years on the battery.

1. Uses one Fenix ARB-L18-1100P type 18350 Li-ion battery (included) for power, alternatively other 18350 Li-ion batteries.
2. In combination with the AER-06S remote switch (not included), it can also be used on a long gun equipped with a MIL-STD-1913 standard Picatinny rail.
3. The flashlight has a memory and always turns on in the last set light mode (1200 or 350 lumens).
4. Protection against reverse battery insertion and protection against too deep battery discharge.
5. Waterproof and dustproof according to IP68 standard (tested under water at a depth of 2 meters for 30 minutes).

• Premium LED Luminus SFT-40 with a lifetime of 50,000 hours is used.
• TIR optics produce a light cone with a range of 210 meters (11,000 cd).
• Charging via USB-C connector with battery charge status indication.
• Compatible with Picatinny MIL-STD-1913 and GLOCK standard weapon rails
• Weight 100 grams (including battery).
• Intelligent overheat protection.
• Flashlight body made of aerospace hardened aluminum.
• Durable hard scratch resistant surface - Type III hard anodized.
• Shockproof against falls from a height of 1 meter.
• Highly wear-resistant, flat-running threads.

Three lighting modes:
1200 lumens (1 hour) -> 350 lumens (2 hours) -> 1200 lumen strobe.

Specifications:

Power: 1200 lm
Range: 210 m
Max life: 2 hrs
Power: 1x 18350
Number of modes: 3
Waterproof: IPX8 (2 m immersion)
Light color: Daylight white (5500-6500 K)
Light source: Luminus SFT-40
Weight: 100 g
Dimensions: 7.7 cm (length) x 3.4 cm (height) x 3.0 cm (width)

Controls
There may be an insulating cap on the battery inside the flashlight from the factory. Remove it from the battery pack before first use.
Pressing any of the switchesonce will switch the flashlight to the last selected light mode. Another press will turn it off again.
Press and hold any switch to momentarily turn it on. While held, the flashlight will illuminate and turn off again when the switch is released.
Momentarystrobe activation: With the flashlight on, press and hold any of the switches. After 0.5 seconds, the strobe will activate and will remain lit for as long as the switch is held.
Switching between light outputs: Turn the flashlight on, then press and hold one of the switches, pressing the other switch will then switch between 1200 and 350 lumen modes.
Locking the flashlight: With the light off, press and hold both switches for 5 seconds. The light will then flash twice to indicate the flashlight lock status. The indicator light flashes alternately red and green to indicate that the flashlight is locked. To unlock, press both switches simultaneously again and hold them down for 1 second. This will reactivate the flashlight.
Battery charge indication - the indication LED is located on the side of the flashlight. The flashlight always indicates the battery charge status three seconds after switching on. Green indicates sufficient state of charge (100% - 85%), flashing green (85% - 50%), steady red (50% - 25%) and flashing red critically discharged battery (25% - 1%). If the battery is discharged, the flashlight will automatically reduce power to 50 lumens over time.
Battery status indication can be turned off/on with three button presses closest to the indication LED. The third (last) press should be held until the indication LED flashes in the sequence green-red-green. In this state, the flashlight continues to indicate charging progress.
Charging the flashlight - remove the rubber cap of the charging connector and plug it into a computer, USB AC adapter or USB car adapter (not included) using the included USB-C cable. Alternatively, any cell phone charger with a USB-C connector can be used for charging. The indicator LED on the side of the flashlight glows red while charging, and glows green when fully charged. Charging a fully discharged battery takes about 2 hours. The Li-ion battery used does not suffer from a memory effect, so the flashlight can be recharged at any time.
Intelligent overheating protection - due to the high power in 1200 lumens mode, the flashlight does not overheat. If the internal temperature of the flashlight rises to 60°C, it will automatically start to reduce power. As soon as the temperature of the flashlight drops below 60°C, the power will gradually increase again.

Caution
Use only good quality rechargeable batteries to avoid damage to the flashlight, for example due to battery leakage.
Observe all safety precautions when using the flashlight on a weapon.
Insert the batteries with the positive terminal facing the flashlight head.
If the flashlight flickers, has low output, or does not light up, it could be due to one of the following reasons:
- The battery is dead - replace it or charge it.
- The battery is dead. The contacts inside the flashlight are dirty - clean them with a cotton ball dipped in alcohol.