FENIX E40R 5000 lm černá Rechargeable LED torch

The Fenix E40R is a rechargeable pocket torch that delivers up to 5000 lumens in short-term Turbo mode and shines up to a distance of 242 metres. It is powered by the included 21700 battery with a capacity of 5500 mAh, which recharges via USB-C. The aluminium body with an IP68 rating is ready for outdoor use, work and everyday carry.

Light modes: 5000 lm (short-term Turbo) – 1500 lm (3 h 40 min) – 350 lm (9 h 40 min) – 150 lm (26 h 30 min) – 30 lm (89 h 30 min) – strobe 2500 lm

Included in the box: Fenix ARB-L21-5500 battery, USB-C charging cable, wrist lanyard, spare O-ring, manual, warranty card

1. Power and range on demand
   With the lever switch you can instantly activate Turbo with up to 5000 lumens and a beam distance of up to 242 metres. When you release the switch, the torch returns to the standard mode.
2. Long runtime and fast charging
   Six light functions let you choose between high output and a runtime of up to 89.5 hours. A fully discharged battery can be charged via USB-C with a suitable adapter in approximately 1.5 hours.

• Four high-performance LEDs, 6500 K
• Lever switch and electronic button
• 2500-lumen strobe
• IP68 waterproof and dustproof
• Magnetic tail cap and clip
• Impact resistance: 1-metre drop
• Battery level indicator
• Overheat protection

Specifications:

Output: 5000 lm
Beam distance: 242 m
Max runtime: 89.5 h
Power source: 1x 21700
Number of modes: 6
Light colour: Daylight white (5500-6500 K)
Waterproof rating: IP68 (submersible to 2 m)
Light source: 4 high-performance LEDs, 6500 K, lifespan 50,000 hours
Battery: Fenix ARB-L21-5500, Li-ion 21700, 5500 mAh
Charging: USB-C, input up to 20 W, voltage 5 V and 9 V
Charging time: approx. 1.5 hours (9 V / 2.3 A adapter, torch switched off)
Material: A6061-T6 aluminium alloy
Durability: IP68, impact resistance from a height of 1 m
Dimensions: 13.8 x 3.5 x 2.64 cm
Weight: 146 g without battery, 220 g with battery

Using the Fenix E40R rechargeable torch
From the factory, there may be an insulating tab on the battery inside the torch. Remove it from the battery before first use.
To switch on, move the lever switch from the locked position to the normal lighting position. Move it back to the locked position to switch off and lock the torch. If the switch is in the normal lighting position, the torch can also be switched on and off by holding the electronic button for 0.5 seconds. With short presses of the button when the torch is on, you cycle the output in the order 30 -> 150 -> 350 -> 1500 lumens. The torch remembers the last selected standard mode, except for the 1500-lumen mode; after using that mode, the next time you switch it on it will light at 350 lumens.
Instant Turbo - press and hold the lever switch in the Turbo position. The torch provides short-term maximum output up to 5000 lumens. When you release the switch, it returns to the standard mode. Strobe at 2500 lumens is activated in the normal lighting position by holding the electronic button for 1.2 seconds.
Charging - flip open the silicone cover of the charging port on the side of the torch and connect the included cable with the USB-C connector. Connect the other end to a suitable USB power adapter. During charging, the indicator lights red; when fully charged it turns green. Charging a fully discharged Fenix ARB-L21-5500 battery takes approximately 1.5 hours with a 9 V / 2.3 A adapter when the torch is switched off. The torch can also be used while charging. After charging, disconnect the cable and close the port cover.
Intelligent overheat protection - when the temperature reaches 60 °C or higher, the torch automatically reduces output to limit heating. Once the temperature drops below 60 °C, the output gradually returns to the originally set level.
Battery level indication - when the torch is switched off, briefly press the electronic button. The ring indicator will light for 3 seconds, even when locked. The battery status is also displayed for 3 seconds each time the torch is switched on. Solid green means 85-100%, flashing green 50-85%, solid red 25-50% and flashing red less than 25%.
Locking the controls - move the lever switch to the locked position. This prevents accidental activation during transport in a pocket or bag. To unlock, move the switch back to the normal lighting position. During storage or transport, accidental activation can also be prevented by removing the battery.
Low battery warning - as the voltage drops, the torch gradually reduces output down to the lowest mode of 30 lumens. If the voltage continues to drop in this mode, the indicator will start flashing red. Recharge or replace the battery as soon as possible. When the voltage drops below 2.8 V, the torch automatically switches off to prevent over-discharge of the battery.
Battery replacement - unscrew the tail cap and insert the battery with the positive (+) pole towards the head. Then fully tighten the tail cap again.

Warning
Do not disassemble the sealed part in the torch head yourself, as this will void the warranty.
Do not look directly into the light source and keep the torch out of reach of children.
At high output, especially in Turbo mode, the torch heats up quickly. Take extra care to avoid burns and do not bring the torch head close to flammable objects.
Before placing it in a pocket or bag, switch the torch off and lock it.
Use only high-quality 21700 Li-ion batteries with protection circuitry, preferably from the Fenix ARB-L21 series. Insert the battery with the positive pole towards the torch head.
If the torch will not be used for an extended period, remove the battery.
If the sealing O-ring appears damaged after prolonged use, replace it with a suitable spare to maintain the torch’s waterproofness.
If the torch flashes, shines intermittently or does not turn on, it may be due to one of the following reasons:
- The battery is discharged; recharge or replace it.
- The contacts of the battery or torch are dirty – clean them with a cotton swab soaked in alcohol.