Outdoorweb.eu

The Fenix E06R PRO is a revolutionary torch that combines extreme performance with a compact design. Two top-tier LED chips, a UV diode and a laser fit in your pocket without getting in the way. Up to 1600 lumens, 160 metres of range and a battery that lasts up to 111 hours – this is EDC on the next level.

Included in the package: torch, wrist lanyard, USB‑C charging cable.

Warranty: 2 years

1. Two separate powerful light sources
   A long-range spotlight with cool white light and a wide floodlight with neutral white light can be switched instantly. Each has five brightness levels, a turbo mode and strobe.
2. Multifunction control with night mode
   Ultraviolet, laser, discreet colour pulsing and a breathing button light make it a versatile tool. Four buttons allow precise control without complications.

• Flat design, 104 grams, pocket size
• USB‑C charging directly in the torch body
• Battery status indicator in the button
• Last-used mode memory
• IP66 water resistance, 1 metre drop without damage
• Intelligent thermal protection
• Two tactical modes for emergency situations

Specifications:

Light output: 1600 lumens (ANSI) in turbo mode
Beam distance: 160 metres (6234 candela)
Battery: 1650 mAh internal lithium-polymer
Runtime: up to 111 hours (lowest mode)
Modes: 19 total (white, UV, laser, coloured)
Dimensions: 12.3 x 3.1 x 2.1 cm
Weight: 104.1 g
LED emitters: Luminus SST-20 and SFT-25
UV wavelength: 365 nanometres (1300 mW)
Laser: 0.39 mW / 650 nanometres (Class 1)
Charging: USB‑C, 5 V / 1 A
Waterproof rating: IP66 (heavy rain)
Impact resistance: 1 metre drop, aluminium with Type III coating

Operation
To switch on or off the white light, press and hold the main or tail button for about 0.5 seconds. The four basic output levels are then switched by pressing the same button. Turbo mode is activated by holding the tail button for 0.8 seconds. Strobe can be activated by holding the main button for 1.2 seconds. Switch between the spotlight and floodlight by pressing the oval toggle button.
UV light is switched on and off by holding the purple button on the side of the torch for about 0.5 seconds.
Red laser is switched on and off by holding the red button on the side of the torch for about 0.5 seconds.
Coloured button backlight and tail light - the 3D light ring around the main button, including the lights in the tail of the torch, can be turned on by double-pressing the main button quickly when the torch is off. Subsequent presses switch between five functions – red flashing → blue flashing → red and blue flashing → RGB light → Aurora. The light ring is switched off again by holding the main button for 0.5 seconds.
Last mode memory - when switching on the white light, the torch always turns on in the last selected brightness level.
The control buttons can be locked to prevent accidental activation, e.g. during transport in luggage - to lock, switch the torch off and hold the red and purple side buttons simultaneously for 2 seconds. The torch will then flash to indicate lockout. To unlock, hold them again for 2 seconds.
Battery level indication - with the torch switched off, briefly press the main button once; a small LED in the button will then light for three seconds. Green indicates 100–85%, green flashing 85–50%, red indicates 50–25%, and red flashing indicates less than 25%. The number of available white-light modes may vary depending on the current charge level.
Overheat protection - if the torch temperature exceeds 60 °C, the output will be reduced automatically. Once the temperature drops below 60 °C, the output will increase again.
Low battery warning - the torch will gradually switch automatically to the lowest output level and the indicator LED in the toggle button will start flashing red.

Charging
Connect the torch via the USB‑C cable to a computer, a mains USB adapter or a car USB adapter. Any mobile phone charger with a USB‑C connector can also be used for charging.
During charging, the indicator LED in the button lights red; once fully charged, it lights green.
Charging voltage: 5 V, max charging power 5 W (5 V / 1 A).
During charging, the torch can be used except for turbo mode and coloured modes. The number of available white-light modes may vary depending on the current charge level.
The battery used does not suffer from memory effect, so the torch can be recharged at any time.

Warning
Do not disassemble sealed parts yourself; this will void the warranty.
If the torch does not switch to higher output levels, or does not turn on, the battery is discharged - recharge the torch.