FENIX E03R V2.0 modrá - rechargeable flashlight

Fenix E03R V2.0 is the successor to the successful miniature rechargeable flashlight that can be carried on your keys or in your purse. Despite its minimal size and weight of just 30 grams, it offers a high lumen output of up to 500 lumens (ANSI).

The light cone evenly illuminates a wide area up to 90 meters. Power is provided by an integrated 400 mAh Li-pol battery, which is charged via the modern USB-C connector on the side of the flashlight. There are a total of four modes of white light and two modes of red light with a maximum lasting up to 30 hours in the lowest mode.

A unique new feature is the so-called Red Light. Breathing light, a pulsating light around the switch button of 1 lumen, which you can use for unobtrusive signaling or identification of the flashlight's location.

The flashlight comes with a key ring so you can easily carry it with you at all times. A battery charge indicator in the button is also handy. You'll always be happy with this useful gift.

All flashlight parameters (lumen output, battery life, waterproof, shockproof and range) are measured in accordance with ANSI/NEMA FL 1-2009.

Warranty: 2 years

1. The Fenix E03R V2.0 has been awarded the ISPO Award 2023.
2. Two white MATCH CA18 LEDs and a red Everlight 2835 LED are used. All with a 50,000 hour lifetime.
3. The flashlight is powered by a built-in rechargeable 400 mAh lithium polymer battery.
4. CNC milled aluminum alloy body with Type III hard anodized anti-scratch finish.

• Four modes of white light
• Two modes of red light
• Pulsating light around the switch button with 1 lumen (Breathing light).
• Battery charge indication in the button.
• Charging via modern USB-C connector.
• Memory for the last set white light power mode.
• Intelligent overheat protection.
• Waterproof to IP66 standard (spraying with strong jets of water from all directions).
• Insensitive to drops from 1 meter height.
• Includes a key ring and USB-C charging cable.

Lighting Modes:

Four white light modes: 500 lumens (1.3 hours) -> 150 lumens (2 hours) -> 30 lumens (6.5 hours) -> 5 lumens (30 hours).
Two red light modes: 5 lumens -> red flashing (5 lumens).

Specifications:

Lumen output: 500 lm
Range: 90 m
Material: CNC milled aluminum alloy body
Dimensions: 5.25 cm (length) x 2.6 cm (width) x 1.3 cm (height)
Max life: 30 hours
Power: Internal battery
Number of modes: 6
Waterproof: IP66 (heavy rain)
Light color: Daylight White (5500-6500K), Red
Light Source: MATCH CA18, Everlight 2835
Weight: 30 g (including battery)

Use
To turn on or off, hold the side button for approximately 0.5 seconds. To turn on the red light, hold the button for 1.2 seconds. You can switch power modes at any time during operation by pressing the side button. To switch on the Breathing light, switch off the flashlight and press the button twice quickly.
The control button can be locked to prevent spontaneous switching on, e.g. when transporting in luggage - to lock it, switch off the flashlight and hold the button for 3 seconds. The flashlight will then flash twice to signal locking. To unlock, hold the button again for 3 seconds.
Battery charge indication - with the flashlight off, press the button once briefly, then the small LED in the button will light for three seconds. A green light indicates the battery is 100-85% charged, a green blink indicates 85-50%, a red light indicates the battery is 50-25% charged, and a red blink indicates the battery is less than 25% charged.
Overheat protection- If the temperature of the flashlight exceeds 60°C, the power will be automatically reduced. Once the temperature drops below 60°C, the highest power output can be used again.
Drained Battery Warning - the flashlight will gradually switch automatically to the lowest power mode and the indicator LED in the switch button will start flashing red.

Charging
Remove the rubber cap of the USB-C connector and plug the flashlight into a computer, USB AC adapter or USB car adapter with the USB-C cable. Alternatively, any mobile phone charger with a USB-C connector can be used for charging.
During charging, the indicator LED in the button glows red, after a full charge it glows green.
The charging time of a fully discharged battery takes about 2 hours.
The Li-pol battery used does not suffer from memory effect, so the flashlight can be recharged at any time.
Thoroughly seal the USB connector cap after each charge.

Caution
Do not disassemble the sealed parts yourself, it will violate the warranty.
In humid environments, make sure the USB-C connector cap is properly seated in the flashlight.
If the flashlight does not switch to higher power modes or light up, the battery is dead - charge the flashlight.