FENIX BC26R - cyklo svítilna

The powerful Fenix BC26R rechargeable cycling flashlight delivers up to 1600 lumens (ANSI) with reach up to 169 meters. It is powered by a replaceable Li-ion battery type 21700 with a capacity of 5000 mAh, which is included and recharges via a USB-C connector directly in the flashlight. The light source is a modern Luminus SST-40 diode.

Specially designed optics create a very wide light cone that smoothly illuminates the entire area in front of the bicycle at an angle of 100°, so it shines even in places that ordinary bicycle lights do not cover. The design of the holder allows for quick mounting and removal of the light on the handlebars without tools, and the holder also allows for quick removal of the flashlight so it can be used as a high-performance handheld light.

The holder can be used on all handlebar diameters from 22 to 32 millimeters. The Fenix BC26R offers a total of five digitally controlled power modes with up to 65 hours of runtime, and there's no shortage of flashing. Fenix bike lights provide you with quality illumination for night training, regular commuting and endurance racing.

All flashlight parameters (lumen output, battery life, waterproofing and range) are measured in accordance with ANSI/NEMA FL 1-2009.

Package Contents: flashlight, universal handlebar mount, Fenix 21700 5000 mAh battery, USB-C cable, replacement sealing ring, rubber inserts for handlebar mount.

• The powerful Luminus SST-40 LED with a lifetime of 50000 hours is used.
• One Li-ion battery type 21700 5000 mAh (included)
• One 18650 Li-ion battery can also be used in an emergency, but an ALF-18 reducer must be purchased
• In prolonged use of the highest power output, the flashlight may heat up and activate the smart protection function
• Digital power control
• Discharged battery warning, overcharge and full battery protection
• Specially shaped optics create a light cone combining broad peripheral illumination
• The flashlight attaches to the holder with a quick-release mechanism
• Rubberized construction of the holder sleeve ensures a firm and secure fit
• Compatible with handlebars with a diameter of 22 to 32 millimeters
• Direction of light can be adjusted in three lateral steps of approx. 30°
• /li>
• Memory for last set power mode (except flashing mode)
• Waterproof and dustproof to IP68 standard
• /li>
• Insensitive to drops from a height of 1.5 meters

Total of five power modes: 1600 lumens (3.5 hours*) -> 600 lumens (9.5 hours) -> 200 lumens (18 hours) -> 50 lumens (65 hours) -> Flicker (pulsing between 50 and 600 lumens).

Lumen output: 1600 lm
Range: 169 m
Material: A6061-T6 aerospace hardened aluminum
Dimensions: 11.3 x 2.9 x 2.7 cm
Weight: 155 g (including battery)

Bike light use
From the factory, there may be an insulating cap inside the flashlight on the battery. Remove it from the battery pack before first use.
To turn on or off, hold the side button for approximately 0.5 seconds. The flashlight will always turn on in the last set mode (except for flashing), and you can switch other power levels at any time during operation by pressing the button. To switch to flashing mode, press the button twice quickly.
Battery capacity indication (only valid when powered by a 21700 Li-ion battery) - with the flashlight off, press the button once briefly, then the indicator LED next to the button will light up for three seconds. Green illumination indicates the battery is more than 75% charged, green flashing indicates 75-50% charged, red illumination indicates 50-25% charged and red flashing indicates less than 25% charged. The indicator LED also illuminates when the flashlight is on, so the user is kept informed of the battery status while driving.
Discharged Battery Warning - If the battery capacity drops below a safe level, the flashlight will automatically switch to lower power modes to ensure the longest possible battery life (the flashlight cannot be switched to higher modes afterwards). If the battery is critically low, the button will flash red. In this case, we recommend charging the flashlight as soon as possible to avoid turning off the protective electronics built into the batteries and thus turning off the light.
Intelligent overheating protection - after exceeding 60 °C, the flashlight will automatically gradually reduce power, after cooling down below this limit, the highest modes will be available again.

Charging
Loosen the rubber cap of the USB-C connector on the bottom of the flashlight and plug it into a computer, power bank, USB AC adapter or USB car adapter using the included USB cable.
The button glows red while charging, and glows green when fully charged.
Charging time is approximately 4 hours. The Li-ion battery used does not suffer from a memory effect, so the flashlight can be recharged at any time.
During charging, the flashlight can be used in an emergency, but only in the lowest 50 lumen mode.
After charging and removing the power cord, be sure to seal the USB-C connector cap.

Warning
Do not disassemble the sealed parts in the flashlight head yourself, it will violate the warranty. If the protective rubber rings appear damaged after extended use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the flashlight will be properly protected against water.
If the flashlight flickers, does not switch to higher modes, or does not light up, it may be due to one of the following reasons:
- The battery is almost dead, charge it or replace it.
- The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
- The battery cap is loose, tighten it.