FENIX HP30R V2.0 - Nabíjecí LED čelovka

The second generation of the extremely powerful Fenix HP30R V2.0 rechargeable headlamp offers an unrivalled output of up to 3000 lumens (ANSI) and a range of 270 metres. The excellent performance has been achieved by using the powerful XHP50 LED and a pair of XP-G3 S4 LEDs with a warmer shade of light.

The headlamp features a remote reflector and a pair of smaller reflectors with a wide light cone. The two spotlights are controlled separately or alternatively can be run simultaneously in combination mode. It uses two 21700 5000 mAh Li-ion batteries for power, which are included and can be recharged directly in the battery case via the USB-C connector.

The batteries are housed in a separate case on an adjustable cable that can be worn on the back of the neck, placed on a belt, in a pocket or backpack. This increases wearing comfort and in winter the batteries are better protected against frost. The battery case is equipped with a battery capacity indicator and USB output, so you can also use it as a portable power bank to charge your mobile phone or GPS navigation.

The headlamp offers a total of 11 power modes. In the lowest mode with 50 lumens, it provides an excellent battery life of up to 120 hours (or 5 days). The headlamp is powered by digitally regulated constant current to guarantee a constant light output even when the battery voltage is reduced (when the batteries are slowly discharging). The HP30R V2.0 is particularly suitable for cross-country skiing, ski mountaineering, night running, cycling, fishing, caving and other activities.

The body of the headlamp is made of aluminium alloy used in the aerospace industry. This ensures excellent cooling and resistance to damage.

All headlamp parameters (lumen output, battery life, waterproofing, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

• A powerful XHP50 LED and XP-G3 S4 LED with a warmer light tint and a 50,000 hour lifetime are used.
• Eleven lighting modes
• Lifetimes are measured with rechargeable Li-ion 21700 5000 mAh batteries.
• Combination mode produces a light cone with a range of 270 meters
• Remote spotlight illuminates up to 251 meters
• Wide spotlight illuminates up to 78 meters (1513 cd).
• Digitally controlled for constant brightness.
• Intelligent overheat protection.
• Uses two 21700 5000 mAh rechargeable batteries (included)
• Two 18650s can be used if needed when using ALF-18 reducers.
• The batteries are housed in a separate case that can be placed on the back of the neck, on a belt, in a pocket or backpack.
• The batteries are charged directly in the battery case via the USB-C connector.
• Powerbank function - USB output for powering USB devices.
• The battery case is equipped with a battery level indicator.
• The headlight can be tilted in several steps to set the desired direction of illumination.
• The body of the headlamp is made of aluminum alloy used in the aerospace industry.
• Resistant to falls from a height of 1 meter.
• Proof and waterproof to IP66 standard (spraying with strong jets of water from all directions).
• Hardened ultra clear glass lens with anti-reflective surface.

Power Modes:
Remote Spotlight: 2000 lumens (6 hours)-> 800 lumens (12 hours)-> 200 lumens (34 hours)-> 50 lumens (120 hours)
Wide Spotlight: 1000 lumens (10 hours) -> 200 lumens (34 hours) -> 50 lumens (120 hours)
Combination Mode: 3000 lumens (5 hours) -> 1800 lumens (6 hours) -> 400 lumens (17 hours) -> 100 lumens (60 hours)

Both the main and wide reflectors can be turned on simultaneously, and the modes can be combined freely to achieve a total output of up to 3000 lumens.

Light output: 3000 m
Range: 270 m
Material: aerospace-grade aluminum alloy
Weight: 437 grams (including straps and stainless steel belt carrier and batteries).<9.2 cm x 5.6 cm x 4.4 cm
Battery case dimensions: 10.7 cm x 5.0 cm x 4.1 cm

Fenix HP30R V2 headlamp use.0
From the factory, there may be a white insulating cap inside the battery case on the batteries. Remove it from the batteries before first use.
Controls - The headlamp is operated by a rotary switch. In its center position, the headlamp is off.
- Remote reflector - to turn on the remote reflector, turn the switch clockwise, the headlamp turns on to the lowest power mode and turns up the power to the highest mode. Turning it back decreases the power.
- wide spotlight - turning the switch counterclockwise turns on the two LEDs for the wide cone from lowest to highest mode, in the opposite direction the power decreases.
- To activate the combination mode, you must turn on one of the main modes (remote or wide) and briefly press the button on the side of the switch. The output of the combined mode is then reduced or increased in accordance with the originally selected circuit. The combined mode can be switched off partially by pressing the side button (switches off one of the circuits) or completely by turning it to the centre position.
The length of the cable connecting the headlamp to the battery case can be increased using the extension cable included in the package. Connect and disconnect the connectors in a circular motion, do not pull them apart by force. After replacing the batteries, tighten the tightening screw on the battery case thoroughly to ensure good water resistance.

Battery Status Indication
Press the button on the battery case to activate the battery capacity indicator (four LEDs lit 80-100%, three LEDs lit 60-80%, two LEDs lit 40-60%, one LED lit 20-40%, one LED flashing to indicate less than 20% remaining battery capacity).

Charging
Unsnap the rubber cap of the USB-C connector on the side of the headlamp and use the included USB-C cable to plug it into a computer, USB AC adapter or USB car adapter. Alternatively, any mobile phone charger with a USB-C connector can be used for charging. The indicator LEDs on the battery case flash during charging, and are permanently lit when fully charged. Charging fully discharged batteries takes approximately 4.5 hours.

To activate the USB output (power bank function)
Connect the device you want to charge and press the button on the battery case. Activation of the USB output is indicated by flashing LEDs on the case.

Intelligent overheat protection
When the temperature of the headlamp head rises above 60°C, it will automatically start to reduce power until its temperature stabilizes. Once the temperature drops below 60°C, the power will automatically increase again. Thus, operation at the highest power modes is not limited by time, but only by temperature.

Warning
Do not disassemble the sealed parts yourself, it will violate the warranty. Use only high quality 3V CR123A batteries and 18650 Li-ion batteries to avoid damaging the headlamp, for example due to battery leakage. If the headlamp flashes, does not switch to higher power modes or does not light up, it may be due to one of the following reasons. Make sure the connector on the cable between the headlamp and the battery case is firmly connected. The contacts in the battery holder are dirty - clean them with a cotton ball dipped in alcohol.