FENIX PD36 TAC - rechargeable flashlight

The Fenix PD36 TAC is a very powerful tactical flashlight with simple operation and quick strobe activation. It is equipped with the latest LUMINUS SST-70 LED and delivers up to 3000 lumens (ANSI) and a range of up to 274 meters.

Included in the package is a rechargeable 21700 Li-ion battery with a 5000 mAh capacity that charges via its own USB-C connector. The flashlight features a rotary dial that can be used to lock the controls or select one of two modes of use. In tactical mode, the flashlight can be switched to 2000 lumens or strobe mode.

In duty mode, you can choose between five light modes and strobe. On the lowest mode, it can shine for up to 160 hours. The precision and waterproof design makes this tactical flashlight primarily suited for harsh outdoor conditions. Great for law enforcement, search and rescue operations and hunting.

All flashlight parameters (luminous flux, battery life, waterproof, range, and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Warranty: five years on flashlight, two years on battery.

Package Includes: Flashlight, Fenix ARB-L21-5000U battery with USB-C connector, USB-C cable, replacement o-ring and belt pouch.

Can be purchased: AER-05 cable switch, ALG-01 gun rail mount, ALG-00 quick release rail mount, ALG-18 barrel mount.

The following accessories are also compatible with the flashlight: barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight scope mount, metal scope mount, ALP-10S holster, bike mount, Fenix bike mount.

• The powerful Luminus SST-70 LED with a lifetime of 50,000 hours is used.
• Two lighting modes
• Duration times are measured with a rechargeable Li-ion battery type 21700 with a capacity of 5000 mAh.
• Highly efficient smooth cone light reflector with a range of up to 274 meters (18700 cd).
• Intelligent overheat protection.
• Discharged battery warning.
• Body construction of A6061-T6 aerospace hardened aluminum.
• Low scratch resistant finish - Type III hard anodized.
• Resistant to drops from a height of 1 meter.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Hardened ultra clear glass lens with anti-reflective surface.
• Tactical switch at the end of the flashlight (instant on/off function by pressing).
• Highly wear-resistant arched threads.

Lighting Modes:
Tactical Mode: 2000 lumens (3.1 hours) -> 2000 lumen strobe.
Service Mode: 3000 lumens (1.5 hours) -> 1000 lumens (3.25 hours) -> 350 lumens (10.1 hours) -> 150 lumens (18.75 hours) -> 30 lumens (160 hours) strobe -> 2000 lumens

Dimensions: 14 cm (length) x 2.65 cm (head diameter) x 2.54 cm (body diameter)
Weight: 164 grams (including battery), 92 grams (without battery)
Material: aerospace hardened aluminum A6061-T6
Lumen output: 3000 lm
Range: 274 m

Use
The rotary knob on the end of the flashlight can be used to select between the light modes, which have different controls.
Tactical mode (rotary knob in left position):Press the tactical button on the end of the flashlight to turn on, press the button to activate immediately. The flashlight will always activate in the highest mode. To activate the strobe, hold the button down for 0.8 seconds (even from off). Pressing it returns the flashlight to its original mode. Press the button to turn the flashlight off.
Service Mode (rotary control in right position). The flashlight remembers the last selected mode (except strobe). Light modes (except strobe) can be cycled by pressing the button. To activate the strobe, hold the button for 0.8 seconds (even from off). Pressing the button returns the flashlight to its original mode. Pressing the button turns the flashlight off.
The control button can be locked in the middle position of the rotary control. If the flashlight is turned off, it cannot be turned on. If it is on, the control will lock in the currently set light mode and the control button will not respond. To reactivate the tactical button, the control must be turned to tactical or service mode. When using the wired switch, only the highest constant light mode is available.
Intelligent overheat protection - if the temperature of the flashlight exceeds 60°C, then it will reduce power itself in incremental steps until the temperature drops below a safe limit. Once it has cooled below 60°C, full power can be used again.
Discharged Battery Warning - the flashlight automatically switches to the lowest power setting in a step-by-step manner and flashes 3 times every five minutes.

Charging
Remove the battery from the flashlight and plug it into the side USB-C connector using the USB cable. During charging, the indicator light in the plus pole of the battery is red. When the battery reaches full charge, it lights blue or green. The charging currents of the built-in USB-C connector are 2A. Charging time takes approximately 3-4 hours.

Caution
Do not disassemble the sealed parts in the flashlight head yourself, it will violate the warranty.
If the protective rubber rings appear damaged after extended use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the flashlight will be properly protected against water.
If the flashlight flickers, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
If the battery is dead, charge it.
The contacts inside the flashlight are clogged - clean them with a cotton swab dipped in alcohol.
The back of the flashlight is loose, tighten it.