FENIX E05R hnědá - nabíjecí LED svítilna

All flashlight parameters (luminous flux, battery life, waterproofness, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Package contents: flashlight, metal ring for hanging on keys, replacement o-ring, micro-USB cable.

• Powerful LED XP-G2 S3 with 50,000 hours of life is used.
• Four power modes
• Powered by built-in Li-pol battery with 320 mAh capacity.
• Charging via micro-USB connector.
• Charging time of fully discharged battery is about 1 hour.
• Overheat protection.
• Light cone with a range of 64 meters (1046 cd).
• Made of aerospace hardened aluminum. Durable surface - Type III hard anodized.
• Resistant to falls from 1 meter height.
• Waterproof and dustproof to IP68 standard

Power Modes:
Four power modes: BURST 400 lumens (while holding the button) -> 150 lumens (0.93 hours) -> 25 lumens (5 hours) -> 3 lumens (30 hours).

Lumen: 400 lm
Range: 64 m
Weight: 24 g
Dimensions: 6.8 cm (length) x 1.53 cm (head) x 1.5 cm (body)

Use
Turn on or off the flashlight by holding the button for 0.5 seconds. Further short presses cycle through the light modes 3 - 25 - 150 lumens. To activate the 400 lumen BURST mode, hold the button for more than 1.2 seconds. When the button is released, the flashlight switches to the lowest light mode.
The control button can be locked to prevent it from switching on spontaneously, e.g. when transporting in luggage. Press the control button twice quickly (within 0.5 seconds). The lamp flashes twice in the lowest light mode to indicate locking. To unlock, press the button again twice quickly and the flashlight flashes twice again and is unlocked.
Overheat protection - Due to the miniature size of the flashlight and the high power in the highest modes, the flashlight automatically reduces brightness once it exceeds 60 °C. Once the temperature is lowered, the highest modes can be reactivated.

Charging
Unscrew the waterproof nut that covers the micro-USB connector. Then plug the charging cable into the USB connector of your computer, USB mains adapter or car. During charging, the indicator LED on the flashlight glows red, and when fully charged, it glows green. The standard charging time for a fully discharged flashlight is 1 hour.

Caution
Do not disassemble the sealed parts yourself, it will violate the warranty.
If the flashlight blinks or does not light up, it may be due to one of the following reasons:
- The battery is dead, charge it.