FENIX CL26R PRO olivová - Rechargeable lantern

Fenix CL26R PRO is a practical portable rechargeable lantern that can be used to illuminate a room, tent, campsite, caravan, cabin, boat or workbench. In addition, it also has a powerbank function so it can be used to recharge other USB devices. The lantern offers a circular lighting function and a bottom lighting function, the individual light modes are switched with a rotary control. In addition, both lighting modes can be combined to achieve a total output of up to 650 lumens.

The CL26R PRO is powered by a Li-ion battery type 21700 with a capacity of 5000 mAh (included), which is charged directly in the lantern via the USB-C connector and provides power for up to 408 hours of operation in the lowest mode. There is also a red light that does not interfere with the eyes' adaptation to darkness.

Front one-way light and bottom light are very practical power-saving features. They are especially useful in situations where circular omnidirectional lighting is not needed.

Thanks to the durable and shockproof construction with IP66 protection, the flashlight can be safely used even in inclement weather (heavy rain). The top of the lantern is equipped with a hanging eye with the possibility of opening it as a carabiner and a strong neodymium magnet, so it can be easily hung or fixed to anything iron. Thanks to its compact size, the lantern is especially suitable for camping and hiking, you can also use it in a caravan, boat or cabin.

All parameters of the lantern (luminous flux, battery life, waterproofness, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Package contents: lantern, battery Fenix ARB-L21-5000 V2.0, replacement o-ring and USB-C cable.

Warranty: five years on lantern, two years on battery.

1. The light source is high-brightness SMD diodes and red LEDs.
2. Round and bottom light modes can be combined for a total output of up to 650 lumens.
3. Powered by a 1x Li-ion 21700 battery with 5000 mAh capacity (included), any 21700 battery from our range can be used as a spare.
4. Powerbank function with USB-A output connector for charging other portable electronics with USB charging.
5. Top side features a hanging eye with carabiner function and a neodymium magnet for attaching to anything metal.

• Six modes of circular illumination
• Three modes of lower illumination
• Electronics with extended light time function and reverse battery protection.
• Charging via USB-C connector.
• Made of durable plastic, the lantern is shockproof to drops from a height of 1 meter.
• Waterproof to IP66 standard (spraying with strong jets of water from all directions).
• An omnidirectional diffuser produces a wide, uniform light cone with a range of up to 15 meters.

Lighting Modes:

Six circular lighting modes: 500 lumens (10 hours) -> 200 lumens (13 hours) -> 50 lumens (40 hours) -> one-way 25 lumens (67 hours) -> Red light 3 lumens (125 hours) -> Red flash 3 lumens (240 hours)
Three bottom light modes: 150 lumens (15 hours)-> 50 lumens (58 hours)-> 5 lumens (408 hours).

Specifications:

Luminous flux: 650 lm
Range: 15 m
Material: durable plastic
Dimensions: 6 cm (diameter) x 6.6 cm (at widest point including driver) x 11.4 cm (height).
Weight: 272 grams (including battery), 199 grams (without battery)
Max life: 408 hours
Power: 1x 21700
Number of modes: 9
Waterproof: IP66 (heavy rain)
Light color: Daytime White (5500-6500K), Red
Light Source: SMD diodes
Weight: 272 g

Using the Fenix CL26R PRO
From the factory, there may be an insulating cap inside the lantern on the battery. Remove it from the battery pack before first use.
Turn the switch clockwise to turn on the main circular light. Turn the switch counterclockwise to turn on the lower light. Turning the switch in the selected direction toggles the illumination modes of the on light. Turn the switch to the middle "off" position to turn the lantern off again.
Combination of main and lower light - main and lower light can be combined. Turn on one of them with the rotary switch to the desired power mode. The second light is then switched on by holding the electronic switch for 0.5 seconds, its modes can be further switched by pressing the button.
When the lantern is switched off, the red light is switched on and off by holding the electronic switch for 0.5 seconds. When it is on, the red light is switched between modes by pressing the button.
Battery charge indication - after a short press of the button (the lantern must be switched off) the LED charge indicator above the switch is activated. Four lit LEDs indicate that the battery is 80-100% charged, three lit 60-80%, two lit 40-60%, one lit 20-40% and one flashing LED indicates that the battery is less than 20% charged.

Powerbank Functions
Remove the dust cap and insert the USB cable into the USB Type-A discharge port on the flashlight, then plug the other end of the cable into the USB device being charged. When the lantern is on, the power bank function will activate automatically when the USB cable is plugged in. If it is off, then press the electronic switch, the indicators will recede from right to left to show the status. You cannot use the highest power or combine the main and lower light modes during discharge. Be sure to seal the dust cap when charging is complete. If the battery voltage is too low, the power bank function will turn off.

Charging the Fenix CL26R PRO
To charge the lantern, remove the dust cap. Connect the lantern using the included USB-C cable to your computer, USB AC adapter or USB car adapter. A standard mobile phone charger or power bank can also be used for charging. During charging, the indicator LEDs above the switch flash to show the charging progress. They remain lit after charging is complete.
The battery does not suffer from memory effect, so it can be recharged at any time and there is no need to wait until it is discharged. Charging a fully discharged battery takes approximately 3.5 hours (depending on the strength of the charging source used).
During charging, the lantern can only be switched to 5, 25 and 50 lumen mode.

Warning
Do not disassemble the sealed parts yourself, this will breach the warranty.
If the flashlight flashes, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons:
- The battery is almost dead - charge it.
- The electrical contacts are dirty - clean them with a cotton swab dipped in alcohol.
- The battery cap is loose, tighten it.