Outdoorweb.eu

MOTOREX CHAINLUBE with PTFE is a fully synthetic chain lubricant with high resistance to dust and dirt. The special formulation with PTFE reduces friction while ensuring optimum lubrication of the chain links.

The innovative formulation of high quality additives allows excellent chain penetration and precise and smooth shifting. It is designed for use on racing bikes that only undertake short dry journeys.

However, the performance of CHAINLUBE with PTFE can also be used by mountain bikes if the weather conditions and mileage are similar.

• with PTFE to reduce friction
• excellent resistance to dirt and dust
• dry and colourless non-sticky wax film
• enables precise and smooth shifting
• especially for short dry journeys
• also ideal for racing

Volume: 100 ml

Dosage
As they say: as little as possible, as much as needed. Apply a thin layer of CHAINLUBE with PTFE to the entire length of the chain on the outside and inside and leave for a few minutes. Then remove the excess oil with a cloth. The drive should not be used for several hours to allow the lubricant to work and dry as best as possible. Ideally, leave the oil on the chain overnight. If the chain is still a little greasy after longer exposure, wipe it again with a cloth.

Application
Start by shaking MOTOREX CHAINLUBE with PTFE well. Then apply to the dry chain on the outside and inside. Allow to work briefly and then remove excess CHAIN OIL with a cloth. The optimum temperature for application is above 10 °C. A dirty chain can be easily cleaned with MOTOREX BIKE CHAIN DEGREASER.