FENIX LD75C 4xCree XM-L2 - LED flashlight

FENIX LD75C 4xCree XM-L2 - LED flashlight

The ultra-powerful Fenix LD75C compact flashlight delivers an exceptional light output of up to 4200 lumens (ANSI) and a range of up to 490 meters. Thanks to the use of modern 18650 li-ion or CR123A batteries, the flashlight is surprisingly compact - just 15.8 centimeters in length.

The light source is four modern Cree XM-L2 U2 LEDs and one four-chip multi-colour LED for additional illumination. Control is by buttons ergonomically located on the side of the flashlight, which can be used to select from six power modes for the main white LEDs and six modes for the multi-colour LED (red, green, blue, white). The white LEDs and multi-colour LEDs are operated independently and their modes can be freely combined, and by activating all LEDs a luminous flux of up to 4200 lumens can be achieved.

Despite its massive power output, the LD75C retains a comfortable size and weight so it can be carried in a backpack, toolbox, or carried in the passenger compartment of a car. So it's always on hand when you need to illuminate large spaces. These features will be appreciated not only by professionals, but by everyone who demands the highest performance and the smallest possible dimensions.

Package contents: flashlight, case, strap and spare o-rings. Batteries not included

Warranty: 5 years

Parameters:

• Flashlight parameters measured in accordance with ANSI/NEMA FL 1-2009.
• Four state-of-the-art Cree XM-L2 U2 LEDs, one multi-color Cree XM-L LED
• LED lifetime 50000 hours
• Total of six power modes
• Six multi-color LED power modes
• Uses 8 disposable CR123/CR123A lithium batteries
• Can also use 4x 18650 li-ion batteries
• Half the number of batteries can be used in an emergency - half the power
• Multi-piece smooth parabolic reflector creates a light cone with a long range of up to 490 metres
• Digital constant control electronics
• Over-polarity and over-temperature protection
• Memory to always turn on in the last set mode - no strobe
• Durable hard scratch resistant surface - Type III hard anodized
• Shock resistant to drops from a height of 1 metre
• Waterproof to IPX-8 standard
• Tempered ultra clear glass lens with anti-reflective coating
• Odd-numbered threads with increased wear resistance
• Ability to stand alone on a flat spot and serve as a candle
• Distinctive knurling across the entire surface of the lamp for better grip
• Batteries not included

Power Modes:
Four main LEDs: 4000 lumens (1.5 hours) -> 1800 lumens (3 hours) -> 600 lumens (11 hours) -> 200 lumens (35 hours) -> 40 lumens (175 hours) -> Strobe (variable frequency strobe)
Six power modes of the multi-colour LED: blue 45 lumens (11 hours) -> green 190 lumens (11 hours) -> red 140 lumens (14 hours) -> white 200 lumens (11 hours) -> red slow flash -> alternating red and blue flash.

Dimensions: 15.8 cm (length) x 5.2 cm (body diameter) x 7.4 cm (diameter at reflector)
Weight: 430 grams (without batteries)
Material: aerospace hardened aluminium
Luminous flux: up to 4200 lm
Range: 490 m

Usage
WhiteLED and multi-color LED are operated separately and their modes can be freely combined. The main white LEDs are switched on and off by holding the right button for 0.5 seconds, the light levels are then switched by pressing it. The multi-colour LEDs are switched on and off by holding the left C button for 0.5 seconds, the lighting modes are then switched by pressing it. The strobe can be activated by pressing the bottom button with the sun symbol. This button can also be used to switch the flashlight directly to full power, just press and hold it for at least 1 second. Overheat protection - if the flashlight gets hotter than a safe limit, it will automatically reduce the light output. Battery capacity indication (only valid when powered by 18650 li-ion batteries) - press the C button twice quickly, then one of the coloured chips will light up for three seconds. Green indicates fully charged batteries, blue indicates approximately half charged batteries, red indicates nearly discharged batteries, and flashing red indicates discharged batteries.

Notice
Do not disassemble the sealed parts of the flashlight yourself, it will void the warranty. Use only high quality 18650 batteries and CR123A batteries to avoid damaging the flashlight, for example due to battery leakage. If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the flashlight will be properly protected against water. If the flashlight flickers, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons: the batteries are almost dead - replace them. The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol. The back of the flashlight is loose - tighten it.