FENIX HT30R - Rechargeable laser flashlight

The Fenix HT30R rechargeable laser flashlight is one of the tactical flashlights with the longest range in the range. Its white laser light produces an extremely focused beam that is capable of reaching distances up to 1,500 meters (1,500 yards) and a light output of up to 500 lumens (ANSI).

The light source is a white laser with LEP (laser excited phosphor) technology, which is known for its use primarily in the automotive industry on the most luxurious vehicles. The power supply is provided by a single Li-ion battery type 21700 with a capacity of 5000 mAh (included), which is charged via a USB-C connector built directly under the threaded head of the flashlight.

The flashlight is also fully waterproof and dustproof according to IP68 standard (tested under water at a depth of 2 meters). In case of emergency, an 18650 battery with ALF-18 reducer (not included) can also be used for power. The flashlight features two levels of white light output with over 7 hours of runtime including strobe flashing.

The flashlight uses a dual tactical switch that allows for faster and more reliable control in crisis situations. For example, it can be quickly switched directly into strobe mode. The light output is concentrated into a narrow cone, so all the light hits a specific target, making the flashlight ideal for hunting and illuminating distant targets.

All flashlight parameters (lumen output, battery life, waterproofing, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Package Includes: ARB-L21-5000 battery pack, USB-C charging cable, wrist lanyard, belt pouch, replacement o-ring

Parameters:

• White laser with LEP (laser excited phosphor) technology with a lifetime of 50000 hours is used.
• Three lighting modes: 500 lumens (2.3 hours) -> 100 lumens (7.25 hours) -> 500 lumen strobe.
• Smooth reflector for cone of light with a range of 1500 meters (600,000 cd).
• Duration times are measured with a rechargeable 21700 Li-ion battery with 5000 mAh capacity.
• Electronics with digital power regulation, reverse battery insertion protection and protection against too deep battery discharge.
• One 21700 5000 mAh Li-ion battery (included) is used for power. In an emergency, one 18650 Li-ion battery can also be used with the ALF-18 reducer (not included).
• Intelligent overheat protection.
• The flashlight has memory and can be turned on in the last set mode (not valid for flash mode).
• Bottom heavy scratch resistant surface - Type III hard anodized.
• Insensitive to drops from a height of 1 meter.
• Highly wear-resistant low-mast threads.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 meters).
• Hardened ultra-clear glass lens with anti-reflective surface.
• Battery housed between two springs - can withstand recoil when used on a weapon without problems.
• Tactical switch at the end of the flashlight (momentary on/off function).

Power Modes:
Three light modes: 500 lumens (2.3 hours)-> 100 lumens (7.25 hours)-> 500 lumen strobe.

Material: aerospace grade A6061-T6 hardened aluminum
Dimensions: 17.9 cm (length) x 4 cm (head diameter) x 2.6 cm (body diameter).
Weight: 264 grams (including battery).
Luminous flux: 500 lumens
Lumen output: 1500 m

Fenix HT30R Flashlight Controls
From the factory, there may be a insulating cap inside the flashlight on the battery. Remove it from the battery pack before first use.
To turn on the press the larger tactical button located on the end of the flashlight, press the button for immediate activation. Press the adjacent toggle button to switch between power modes at any time during operation. To switch to flash mode with the flashlight on, hold the toggle button for approximately 0.5 seconds. To switch the flashlight directly into strobe mode, press and hold the switch button.
Battery charge indication - Each time the flashlight is switched on, the indicator LED at the charging connector is activated for three seconds. Green flashing indicates 30-100% capacity. Red blinking indicates less than 30% battery capacity remaining (only works when using 21700 and 18650 Li-ion batteries).
Charging the flashlight - Unscrew the flashlight head to expose the USB-C charging connector. Plug the included USB-C cable into it and plug the other end into a computer, USB AC adapter or USB car adapter (not included). Alternatively, any mobile phone charger with a USB-C connector can be used for charging. During charging, the indicator LED opposite the charging connector glows red, after a full charge it glows green. Charging a fully discharged battery takes approximately 3 hours. The Li-ion battery used does not suffer from a memory effect, so the flashlight can be recharged at any time. During charging, the flashlight cannot be switched on.
Intelligent overheating protection - if the temperature of the flashlight rises above 60°C, it automatically starts to reduce the power in gradual steps.

Caution
Use only high quality rechargeable Li-ion batteries with protective electronics.
Insert batteries with the positive terminal facing the head of the flashlight.
If the protective rubber rings appear damaged after extended use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the flashlight will be properly protected against water.
If the flashlight flickers, does not switch to higher power modes or does not light up, it may be due to one of the following reasons:
The battery is almost dead - charge it or replace it.
The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
The head, body or back of the flashlight is loose, tighten them.