STANLEY Classic series NEVERLEAK 350ml kladívková zelená - thermos

New unconventional concept of STANLEY thermo mug. Already from the name it is clear what was the priority. It doesn't sweat when it shouldn't. Just NEVER. Classic STANLEY. Classic STANLEY in hammer green 350 ml

With the STANLEY^® NEVERLEAK thermal mug, it is already clear from the simple English translation with what emphasis it was developed. Its name suggests that it NEVER sweats when it shouldn't. Its name is a STANLEY^® patent for this new and unique thermal cup closure system. It simply can't happen, thanks to the rotary control technology, that somewhere deep in the pack the cap will loosen and the contents will leak out.

It's almost the ultimate in what it was created to do. To keep your drink inside until you want to enjoy your drink, cold or hot. But the unique technology does not prevent the lid from being easily and simply disassembled for cleaning and washing, even in the dishwasher. In addition, it is very lightweight, portable and fits in most car mounts.

Key Features:

• Stainless, food grade and fully recyclable 18/8 steel
• double wall with vacuum insulation
• 100% leak-proof sealing with guarantee
• 3 lid positions (closed, open, cleaning)
• cap is very thin and takes up very little space from the overall size of the cup
• BPA-free cap
• weight 270 g
• dishwasher safe
• diameter 68 mm
• height 194 mm
• height without lid 170 mm - good to know if it fits under your coffee machine ;-)
• durable (hot 7 hours, cold 10 hours, ice chip 30 hours)
• *smaller size (250 ml) fits under most home coffee makers. This eliminates cup-to-cup spilling and temperature loss.
• compact size
• classic yet modern colours
• STANLEY 25 year warranty without compromising on functionality

Removing the cap for washing purposes.
The first attempt might be a bit cumbersome, but after 2-3 three cleanings you will find that there is nothing wrong with it and that everything fits together perfectly.
The cap has three positions. For orinette, top view, the drinking hole is at the bottom, i.e. as for drinking.
1) Closed (position to the far left of the drinking hole, top view)
2) Open for drinking (position in the middle- top view)
3) Service - washing (position to the far right of the drinking hole - top view)
In the service position, the cap can be disassembled into "primitives" for easy maintenance and cleaning. The cap has 3 components. When viewed from above, counterclockwise
b) Turn the entire cap with the inner part facing you
c) Turn the inner part C by the "tab" counterclockwise, until you hear a soft click
d) gently remove the inner part C
e) separate the other two parts (A+B) outer part A and screw part B by simply pulling them apart lightly
f) Reassembly is similar
g) insert the outer part and screw part into each other so that the cover part is all the way to the right and the outer part fits over the screw part. There is no other way
h) rotate the inner part towards you and put the inner part in place so that the larger rubber seal fits over the drinking hole
i) gently turn clockwise by the tab until you hear a soft click again
j) put the outer part from the service position (far right) to the desired position - closed (far left) or drinking (center)